Sub Categories
Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters) Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing) Identifies unused switch ports that can be reallocated Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap Tests all copper cabling media: twisted-pair, coax, and audio cabling
0.5% Accuracy. Overload Fuse protection. Test Clips/Direct insert jack for easy measurement.
Features: ※ 6 1/2 Digit Display:1,200,000 counts※ DCV Basic Accuracy:0.0035%※ Dual Measurements to perform two selected measurements simultaneously※ Bright Vacuum Fluorescent Display (VFD)※ Provide AC+DC Voltage or Current Measurement Functions※ 11 Measurement Functions & 10 Math Functions※ High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements※ Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C ※ High Transmission Speed: Up to 2,400 readings/sec through the USB※ Standard Interfaces:USB, RS232C, Digital I/O※ Optional Interfaces:GPIB or LAN※ Optional Scanner Card:GDM-SC1 (V ch x16, I ch x2)※ Free PC software:DMM Viewer , LabVIEW Driver
FEATURES ● Microprocessor-controlled.● Four terminal measurement.● Measures down to 100μΩ.● 5 Ranges from 200.0mΩ to 2000Ω.● Maximum resolution of 100μΩ.● Three test currents with over-temperature protection.● Protection against inadvertent connection to over voltage.● Large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave inside.● EnerSave Auto hold.● EnerSave Auto off.● Lightweight, robust & compact.● Indicators show if reading may be invalid (RP, RC, and temperature).● "O-Ring” sealed case. SPECIFICATIONS Measuring ranges 0-200.0mΩ in steps of 100μΩ 0-2000mΩ in steps of 1mΩ 0-20.00Ω in steps of 10mΩ 0-200.0Ω in steps of 100mΩ 0-2000Ω in steps of 1Ω Accuracy ±0.5% of reading ±2 digits over the operating temperature range, -15ºC to +55ºC, with the supplied test leads Test current 1mA=>2000Ω range 10mA=>200 / 20Ω ranges 100mA=>2000m / 200mΩ ranges Test current accuracy ±0.1% Protection fuses Mains = 0.5A,...
Resistance, continuity, frequency, capacitance, and diode test Measures 20 A (30 seconds momentary; 10 A continuous) Large white LED backlight to work in poorly lit areas Compact ergonomic design for one-handed operation Compatible with optional magnetic hanger (ToolPak™) True-rms for accurate measurements on non-linear loads Min/Max/Average with elapsed time to record signal fluctuations CAT III 600 V safety rated
FEATURES ● The 890 PR is a Non-Contact phase detector with flashing LEDs and a beeping buzzer to show the detection of AC 3-phase sequence.● Two functions in one unit : open phase and phase sequence detection.● Convenient brightness switch to make the indication visible in dim areas or sunlight.● Back cover magnet attaches the instrument to the AC distribution panel offer easy measurement.● 3-Phase AC 75 to 1000V is fitted for detection.● Detect frequency range is from 45 to 65Hz. SPECIFICATIONS Measurement principle Static induction Input voltage 75~1000Vac Frequency range 45-65Hz Auto-off 5 min. after power on without detection Low battery warning Power LED flashes at 4.6±0.1V or less Operating temperature & humidity 0°C ~ 40°C Max. 80% R.H. Storage temperature & humidity -10°C ~ 50°C Max. 80% R.H. Cable length Approx. 800mm Dimensions 118(L) × 69(W) × 38(D)mm Weight (battery included) Approx. 370g ...
Operating principle: Rectifier type・Suspension type: taut band・pivot and jewel for Clear Line Series, pivot and jewel for FS/FL・JIS C1102 - 2007, Class 2.5 Please specify model, full scale value and unit, rating and cover color when ordering.
I.Introduction: Fruit Sclerometer can measure the hardness of apples,pears,strawberries and grapes,etc.It is a suitable instrument for fruit company,fruit farm,fruit research institutions to test the ripeness of fruits,with compact size,low weight and ocular reading.It is suitable to use on the acene and also can be applied with its matched test stands to improve the accuracy. II.Parameters: Capacity: 2-15 Pressure Diameter: 3.5mm Accuracy: +/-0.1 Pressure Depth: 10mm Dimension: 140*60*30mm N.W.: 0.3kg