About KKInstruments
Sub Categories
Panel type DO analyzer in a compact DIN 96 size One-touch calibration and various self-diagnostic functions 2-point contacts signal, 4 - 20mA output (RS-232 optional) Power supply: 90 - 264VAC, 50/60Hz Meas. range Minimum : 0 - 1 mg/L Maximum: 0 - 50 mg/L
Features: Measurement range: -50 to 200°C; -58 to 392°F Tolerances: ±2.2°C (±3.9°F)
Features * 150/100/70MHz Bandwidths* 1GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time* 2Mega Points Record Length* 2mV~10V Vertical Scale* 1ns~50s Horizontal Range* Up to 27 Automatic Measurements* 5.7" TFT LCD Display* USB Host and Device Interface Supported* Go/NoGo Function* Data Logger* Limited Lifetime Warranty
Features: ※ 6 1/2 Digit Display:1,200,000 counts※ DCV Basic Accuracy:0.0035%※ Dual Measurements to perform two selected measurements simultaneously※ Bright Vacuum Fluorescent Display (VFD)※ Provide AC+DC Voltage or Current Measurement Functions※ 11 Measurement Functions & 10 Math Functions※ High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements※ Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C ※ High Transmission Speed: Up to 2,400 readings/sec through the USB※ Standard Interfaces:USB, RS232C, Digital I/O※ Optional Interfaces:GPIB or LAN※ Optional Scanner Card:GDM-SC1 (V ch x16, I ch x2)※ Free PC software:DMM Viewer , LabVIEW Driver
Our standard sound level meter CENTER 320 has a wide dynamic range from 30 to 130 dB. It has different frequency weighting A and C to respond to human sense or machine monitoring purposes. For different sound pattern, it also supplies Fast and Slow time constant setting. Analog output is also provided for other use.
Electromagnetic Conductivity Transmitter MDM-135A (2-wire) Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) Alterable output range Meas. range Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm
Resistivity Analyzer for Ultra-Pure Water AQM-100A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines Two detectors connectable Meas. range 0.00 - 20.00 MΩ・cm
A complete sampling system composed with cooler, pressure reducer, valves, flowmeter and thermostat chambers Enables sampling for analysis from the boiler Consistent manufacturing from analyzer to sampler Sample condition Maximum temperature: 600 degrees C Maximum pressure: 30 MPa Maximum flow rate: 3 L/min